| Model Series | NF9Mi |
| Part Number | JNF9Mi-2930 |
| Form Factor | Mini-ITX (170 * 170mm) |
| Processor | Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP |
| Memory | 2 x 204-pin SODIMM DDR3L-1333 Single Channel (up to 8 GB) |
| Graphics | Intel HD Graphics, 313MHz - 854MHz |
| Audio | C-Media HS-100B USB Audio |
| LAN | 1 x Intel I211-AT Gigabit LAN |
| Storage | 2 x SATA2 3Gb/s Connectors 1 x M.2 SATA M-key 2242 (shares with one SATA) |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 +9V ~ +36V DC-in jack
1 USB 3.0
1 DVI-I
1 COM port (RS232/422/485)
1 RJ45 LAN (10/100/1000)
3 USB 2.0
1 3.5mm Audio Jacks (Line Out)

|
| Onboard I/O Connectors |
1 PCI Express x1 Slot
1 M.2 SATA M-key 2242 (shares with one SATA)
1 Full size mini PCI-E Slot (pairs with SIM)
2 SATA2 3Gb/s Connectors
1 USB 3.0 Pin Headers for up to 2 additional USB 3.0 Ports
1 USB 2.0 Pin Headers for up to 2 additional USB 2.0 Ports
3 Serial Port Headers (RS232, +5V/+12V)
1 24-bits Dual Channel LVDS connector/Inverter
1 GPIO header
1 Chassis Intrusion header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Parallel header
1 9-pin Audio header
1 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 Front Panel header
3 Fan headers
1 SIM Card Socket
1 4-pin Power Output (Male)
1 2-pin +9V ~ +36V Alternate Power connector (Molex 5566-2)
|
| Power Supply for NF9Mi |
External Power Supply – the board can be powered with a +9V ~ +36V external power supply though a DC connector on the back panel. The rear +9V ~ +36V VDC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +36V and the shell is GND.
Internal Power Supply – the board can alternatively be powered via the internal +9V ~ +36V DC 1 x 2 power connector, where pin 1 is GND and pin 2 is +9 ~ +36 VDC.
Caution: There is no isolation circuitry between the external +9V ~ +36V DC jack and the internal 1 x 2 power connector. It is the system integrator's responsibility to ensure no more than one power supply unit is or can be attached to the board at any time and to ensure the external +9V ~ +36V DC jack is covered if the internal 1 x 2 power connector is to be used.
|
| Market Segments Supported |
√ Digital Signage
√ Panel PC
√ Industrial Automation/Control
√ All-In-One
√ Retail (POS/Kiosk/ATM)
√ Casino Gaming
√ Thin Client
|
| Environment |
Operating Temperature : -20 ~ 70°C
Storage Temperature : -20 ~ 85°C
|