- Intel Celeron J1900 SoC Processor
- Embedded Long-life Series, 5 Year Availability
- 3.5" SBC Form Factor Design for Fanless Systems
- Built-in 4GB RAM, 32GB eMMC, and Wide Range +9V-24V DC jack
- Supports up to 2 Display, DVI-I, 24bit LVDS
- ECO-design for EuP/ErP

Specification
Jetway NF3D432 3.5" SBC Motherboard
ProcessorIntel® Celeron J1900, 2.0GHz Quad-Core SoC, 10W, Bay Trail
MemoryOnboard 4GB DDR3L-1333, non-expandable
GraphicsIntel HD Graphics, 688MHz - 854MHz
AudioRealtek ALC662 HD Audio codec
LAN2 x Intel i211AT Gigabit LAN with Enhanced Surge Protection
Storage1 x SATA2 3Gb/s Connector
1 x Shared mSATA/mini-PCI Express Combo slot (Full-size)
32GB eMMC (OEM option for 16GB/64GB/128GB eMMC)
Super IOFINTEK F81866A
Back Panel Connectors
1 3.5mm Audio connector (Line-OUT)
1 USB 3.0
3 USB 2.0
1 DVI-I
2 RJ45 LAN (10/100/1000)
1 +9V ~ +24V DC-in Jack

Onboard I/O Connectors
1 SATA2 3Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
Power Supply for NF3D
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
Market Segments Supported
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
Ordering Info
Part Number Description
JNF3D432-1900 3.5" SBC motherboard with Celeron J1900, 4GB RAM, 32GB eMMC
JNF3D416-1900 OEM OPTION (PLEASE CALL): 3.5" SBC motherboard with Celeron J1900, 4GB RAM, 16GB eMMC
G01-SATA-BK-B-F (Incl) SATA2 cable
G02-DVD20-A7-WF (Incl) DVD driver disk
G01-PW4PS-2S-32F (Incl) Y power cable
G01-DVI-VGA-BK-F (Incl) DVI to VGA adapter
Downloads
NF3D432-1900 BIOS A02 Release Date 2018-5-23
Description Supports eMMC UEFI.
Download  B3DEMA02.zip
Installation Instructions for DOS 1. Prepare a MS-DOS bootable USB flash drive.
2. Download the zip file.
3. Unzip the file and copy to the USB flash drive.
4. Reboot the PC into MS-DOS mode and run *.bat in command prompt.
5. Wait in suspense until the update finished.
Revised History [A01]. Initial BIOS.

· Please do not flash the BIOS UNLESS your system has a BIOS-related issue. Flashing the wrong BIOS can cause irreparable damage to the system.
· Please be aware that by flashing this BIOS you agree that in the event of a BIOS flash failure, you must contact your dealer for a BIOS replacement. There are no exceptions to this policy. Jetway does not have a policy of replacing BIOS chips directly with end users.


Drivers for NF3D
  Windows 7 (32/64 bit) Windows 8.1 (32/64 bit) Windows 10 (32/64 bit)
Chipset  inf.zip  inf.zip  inf.zip
Video  7_32_bit / 7_64_bit  81_32_bit / 81_64_bit  10_32_bit / 10_64_bit
Audio  audio.zip  audio.zip  audio.zip
LAN  Intellan.zip  Intellan.zip  Intellan.zip
USB 3.0  usb30.zip Built-In Built-In
TXE (Trusted Execution Engine)  w7.zip  w8_32bit / w8_64bit  w10.zip
Manual
1.0  G03-NF3D432-F.pdf
Resources
FCC  FCC
CE  CE
RoHS  RoHS
Power Consumption Report  Power Consumption Report
Temperature Test Report  Temperature Test Report
Watchdog/GPIO sample code  Watchdog and GPIO sample code for Windows and Linux