| Jetway NF3D 3.5" SBC Motherboard |
| Processor | Intel® Celeron N2930 SoC, 1.83GHz – 2.16GHz Burst, Quad-Core, 7.5W TDP/4.5W SDP |
| Memory | Onboard 2GB DDR3L-1333, non-expandable (OEM Option: 4GB, Please Call) |
| Graphics | Intel HD Graphics, 313MHz - 854MHz |
| Audio | Realtek ALC662 HD Audio codec |
| LAN | 2 x Intel i211AT Gigabit LAN with Enhanced Surge Protection |
| Storage | 1 x SATA2 3Gb/s Connector 1 x Shared mSATA/mini-PCI Express Combo slot (Full-size) OEM Option: 16GB/32GB/64GB/128GB eMMC |
| Super IO | FINTEK F81866A |
| Back Panel Connectors |
1 3.5mm Audio connector (Line-OUT)
1 USB 3.0
3 USB 2.0
1 DVI-I
2 RJ45 LAN (10/100/1000)
1 +9V ~ +24V DC-in Jack

|
| Onboard I/O Connectors |
1 SATA2 3Gb/s Connector
1 Shared mSATA/mini-PCI Express Combo slot (full-size)
1 Mini-PCI Express slot (half-size)
4 Serial port headers (3 * RS232, 1 * RS232/422/485)
2 USB Pin Headers for up to 4 additional USB 2.0 Ports
1 24-bit dual channel LVDS connector/inverter (CHRONTEL CH7511B chipset up to 1920 x 1200)
1 8 bit GPIO Header
1 AT/ATX Mode jumper
1 PS/2 Mouse/Keyboard header
1 Chassis Intrusion header
2 2-pin LAN LED header
1 2-pin SPDIF header
1 4-pin SMBUS header
1 9-pin Audio Connector
1 Front Reset/Power buttons
1 4-pin Fan Header
1 4-pin Floppy Power Output (Male)
|
| Power Supply for NF3D |
External Power Supply – the board can be powered with a +9V ~ +24V external power supply though a DC connector on the back panel. The rear +9V ~ +24V DC jack accepts plugs with an inner diameter (ID) of 2.5 mm and an outer diameter (OD) of 5.5 mm, where the inner contact is +9V ~ +24V and the shell is GND.
|
| Market Segments Supported |
√ Digital Security & Surveillance
√ Digital Signage
√ Gaming
√ Industrial Automation/Control
√ Medical
√ Retail (POS/Kiosk/ATM)
√ Networking/Storage Server/Mail Server/Print Server
√ Thin Client
√ HTPC
|