Usage: NUVGPIO gg m [l] 
       where
         gg: GPIO selection
          m: GPIO mode. 0b: Output; 1b: Input.
          l: output value. 0b: Low; 1b: High. 
        
        The output value is valid only when mode = 0.
        If it is input mode, then the return value will be the input value.

Ex: NUVGPIO 80 0 1 --> set GPIO80 as output, and output high
    NUVGPIO 00 1   --> set GPIO00 as input, and the return value should be 0 (Low)