	    Marvell thor Driver for SuSE Linux 10.1

1. [BASIC INFO]

1.1 File List

    suse-10.1-x86_64.img :    The update driver disk image file.

    readme.txt      :    This file.


1.2 How to make the driver disk

    (1) On a PC running MS-DOS:
	Use "rawrite.exe" to write the image to floppy disk.

    (2) On a PC running Linux system:
	execute "dd if=imagefilename of=floppydevicename bs=1440k" to
	write the image to disk.

	Note: 
	    imagefilename    - pathname of the disk image file.
	    floppydevicename - device node for the floppy drive, /dev/fd0 for
			       example.

2. [How to Install]

  2.1 New OS Installation:

    Make an update driver disk using method described in Section 1.2, and
    insert it into your floppy drive, then follow the instructions below:

       1) Start the SuSe Installation by booting from SuSE Linux CD/DVD.

       2) Upon seeing the welcome screen, press "F3" and then the "F5" 
	key and move the highlight bar to the "Yes" option, then press enter.

       3) Move the highlight bar to the option "Installation--Local APIC 
	Disabled", press "Enter".

       4) During the installation process, a dialog box saying "Please 
	choose the Driver Update medium." will show up. Insert the Driver
	Update disk into floppy driver, then select the "fd0: Floppy" 
	option, click "OK" ( just press "Enter" while that option is 
	highlighted ).

       5) When "Driver Update ok" window pops up, click on "OK". You'll 
	return to the Driver Update medium selection window. Click on 
	"Back".

       6) You can now pull the disk out from the drive and proceed with
	the installation.

  2.2 Installation on an existing OS

    Insert the update driver disk into the floppy driver, and following the
    steps below:

      1) login as root
      2) mount -r /dev/fd0 /media/floppy
      3) cd /media/floppy; sh ./install
      4) cd ; umount /media/floppy

    And you're done.

